2 # Ilé, agbegbe P5 Quan Shui, Ganjingzi District, Dalian, China

gbogbo awọn Isori
EN
pe wa

+ 86-411-39641370

Firanṣẹ Meeli

vicente@konsond.com

T1 1.3355 SKH2

Ile>awọn ọja>Irin Irin iyara>T1 1.3355 SKH2

HSS T1 1.3355 igi yika

Pe wa

ni pato

T1 irin jẹ tungsten iru ọpa irin. Agbara giga pupọ lati wọ ati si rirọ. Ti o dara toughness ati gige agbara. Idahun lile lile.


Awọn alaye apejuwe:

T1 1.3355 ROUND BAR 

tiwqn

CSiMn
P&S
Cr
V
W
0.65-0.80
0.20-0.40
0.10-0.40
0.03max
3.75-4.50.90-1.30
17.25-18.75


ohun elo:

Ohun elo naa jẹ ipinnu nipasẹ ohun elo kemikali irin T1 ati awọn ohun-ini. 

O ti wa ni o kun lati ṣe eka abe ati ikolu-sooro irin gige irinṣẹ. 

O tun le ṣe awọn agbejade iwọn otutu ti o ga ati awọn ku extrusion tutu. 

O tun ti wa ni lo lati ṣe jia irinṣẹ, milling irinṣẹ, ati irinṣẹ bi punches, cutters ati be be lo.


ni pato:Yika Pẹpẹ

Specification: diameter: 12mm – 220mm; length: can be customized

Surface: Black Surface/Bright Surface/ Grinded/Peeled/Turned

       

OHUN ENIYAN KAN

itọju       otutu RangeCooling/Quenchingawọn akọsilẹ
Fifẹ1700-2100 ° Fo lọraCool slowly in dry sand or in other insulating media
Ifọwọkan1600-1650 ° FCool slowly at a rate of 35° F per hour to 1000° FFor best results, insulating media is desirable. Hold at temperature for 2 hours
Imukuro Titan1100-1300 ° FCool slowlyStress relieve after rough machining
alapapo1500-1550 ° F
Preheat time in furnace is Hr. per inch of thickness. Heating up to temperature as slow as possible
Lile2325-2375° F(furnace) 2275-2350°F(salt bath)Quench in air or warm oil. To minimize quenching strains, quench in salt at 1000° FFor maximum wear resistance, harden at 2375° F. For maximum toughness and high hardness, harden at 2275° F
Idẹru1022° F-1058°FTemper T1 tool steel immediately after quenching. Hold for at least 2 hoursDouble tempering is recommended. The usual tempering time is 2+2 hours.Recommended temperature is 1000-1075° F for cutting tools. 1100-1200° F for shock tools


ohunApa miran (mm)ilanaIfijiṣẹ ifijiṣẹ

Yika Pẹpẹ

DIA1.0 - 30Tutu-yiya / Centerless lilọImọlẹ & Anneal
DIA20 - 80peelingImọlẹ & Anneal
DIA 13-180Ti yiyi GbonaDudu dudu & Afikun
DIA 70 - 400Ti yiyi GbonaDudu dudu & Afikun


Pe wa