2 # Clădire, zona P5 Quan Shui, districtul Ganjingzi, Dalian, China

toate categoriile
EN
Sunati-ne

+ 86-411-39641370

Trimite e-mail

vicente@konsond.com

O1 1.2510 SKS3

Acasă>Produse>Oțel pentru scule de lucru la rece>O1 1.2510 SKS3

Cold Working Tool Steel O1 1.2510 SKS3 block

Contact

Specificații

O1 tool steel is an oil hardening, cold work general purpose steel with easy machining properties and low hardening temperatures compared to other grades. O1 provides good wear resistance and toughness sufficient for standard tool and die applications making it a suitable choice for tooling with good tool life and economical production. In situations that require greater size stability during hardening, A2 should be considered. Some common applications include: bending dies, trimmer dies, perforators, broaches, blanking dies, forming dies, cutting dies, bushings, forming rolls, knives, drawing dies, and embossing dies. O1 plates and flats are supplied in a decarb free and annealed condition.


Aplicații:

1.Used for make cold die with small cross section and complicated shape and high precision

2. Used to make sheet stamping touch, jewelry embossing mold

3. Widely used in cutting tools, such as broaches, filament taps, long reamer, special milling cutters

4. For the overall hardened plastic mold

5. For thermosetting plastic forming, it requires high wear resistance and high strength mold


COMPOZIȚIE

CMnSiCrW
0.94
1.200.30
0.500.50


Specificații:

Coeficientul de dilatare termică (63-64 HRC)
Temperatura︒Fin/in︒F×10-6Temperatura︒Cmm/mm︒C×10-6
100-5005.9638-26010.73
100-8007.1438-42712.85
100-10007.8438-53814.11
100-12008.0238-64914.44


PROPRIETĂȚI FIZICE

· Densitate: 0.283 lb/in3 (7833 kg/m3)

· Greutate specifică: 7.83

· Modulul de elasticitate: 31 x 106 psi (214GPa)

· Prelucrabilitate: 85-90% dintr-un oțel carbon de 1%.

Surface Finish: Black, Rough Machined,Turned or as per given requirements.

INSTRUCȚIUNI DE TRATARE TERMICA

CALITIRE

TEMPERATURA CRITICA:
Ac1: 1350°F (732°C)Ac3: 1440°F (760°C)
AR1: 1295 ° F (703 ℃)AR3: 1240 ° F (671 ℃)


Avantaj:

1. Little distortion after heat treatment

2. Hardness up to HRC63  

3. Good toughness, good crack-resistance


ArticolDimensiuni (mm)ProcesConditii de livrare
BlocaT 20-200 X 300-800        Laminat la cald și forjat la caldSuprafață neagră / Machine & Anneal


Contactați-ne