2#Building, P5 zone Quan Shui,Ganjingzi District,Dalian,China

Kategoriji kollha
EN
Sejħa Us

+ 86-411-39641370

Ibgħat Mail

vicente@konsond.com

T1 1.3355 SKH2

Id-dar>prodotti>Azzar ta 'Veloċità Għolja>T1 1.3355 SKH2

HSS T1 1.3355 sheet

Ikkuntatjana

speċifikazzjonijiet

T1 Steel is the most widely used tungsten type of high speed steel according to ASTM/A600 standard.As original HSS,T1 steel has good abrasion resistance, high toughness, high hardness (62~66HRC) ,good red hardness,and easy to grinding. T1 steel can still keep the cutting performance of cutting tools when working temperature is below 600 ℃.The general purpose T1 tool steels and the high-vanadium-cobalt T15 are most commonly used in the T series.


Dettall Quick:

 T1 1.3355  sheets, sheet

KOMPOŻIZZJONI        

CSi
Mn
P&S
Cr
V
W
0.65-0.80
0.20-0.40
0.10-0.40
0.03max
3.75-4.50.90-1.30
17.25-18.75


Applikazzjonijiet:

T1 tool steel is usually used in the manufacture of all kinds of cutting tools,such as turning tool,

milling cutter,reamer,drill bit,saw blade,twist drill, also highly suitable for cold-forming tools such as cold extrusion rams and dies, 

as well as  plastic moulds with elevated wear resistance and screws.        


speċifikazzjonijiet:

Physical Properties of HSS T-1 Steels
PropertiesMetriċiImperial
Densità8.67 g / cm30.313 lb / in3


1.3355 Steel Mechanical Properties
PropertiesMetriċiImperial
Ebusija, Rockwell C64.0 - 66.064.0 - 66.0
Proporzjon ta 'Poisson0.27-0.300.27-0.30
Modulu elastiku190-210 GPa27557-30457 ksi


T1 Steel Guidelines for Hardening&Tempering


GĦODDA

T1
TwebbisTempering(twice)
Single-edge cutting tools1280 ° C550 ° C - 570 ° C
Multi-edge cutting tools1180 ° C - 1280 ° C550 ° C - 570 ° C
Cold work tools1150 ° C - 1200 ° C550 ° C - 570 ° C        


PuntDimension  (mm)ProċessKondizzjoni tal-kunsinna
LożorT1.0 - 2.5Irromblati kesħinBlack surface & Anneal
T 2.5 - 8.0Irrumblat bis-sħanaBlack surface & Anneal


Ikkuntatjana