# Ædificans II, P2 zona quanta Shui, Ganjingzi District, Dalian, Sina

All Categories
EN
Call Us

+ 86, 411 39641370,

mittere epistulam

vicente@konsond.com

M2 1.3343 SKH9

domus>Products>Mors Casio>M2 1.3343 SKH9

HSS M2 1.3343 SK H9---filum rod

Nobis loquere

Specifications

1.3343 steel is a general purpose molybdenum high speed steel. 1.3343 steel is characterized by balanced combination of abrasion resistance, toughness and good red hardness. Due to its comparatively low carbon content, 1.3343steel has an excellent combination of toughness properties and abrasion resistance when properly hardened and tempered. 


Applications:

1.Machining tools, e.g drill bits, milling cutters, screw dies, broaches, inserts for circular saw blades;

2.Slotting tools and wood working tools.


Velox Detail:

M2/1.3343  wire rod


Compositiones:

        C       Mn        Si       Cr
       W
       Mo
        V
      0.85
      0.28      0.30
      4.15
      6.15
      5.00
      1.85


De proprietatibus Relativis

Coefficiens Thermal Expansion (65-66 HRC)
Temperature︒Fet in / x 10-6 in︒FTemperature︒Cmm / x 10-6 mm︒C
70-200
5.69
21-9310.23
70-4006.0921-20410.95
70-6006.4221-31611.55
70-8006.6721-42712
70-10006.9721-35812.54


physica

· Spissitas incolarum, 0.294 / p in3 ((VIII)CXXXVIII kg / m8138)

Imprimis · grauitatem: 8.14

· Secundum modulum elasticitas: XXX x CVI psi (30GPa)

· Machinability: 50-60% I% de chalybe


DE INSTRUCTIONIBUS HEAT TREATING

CALLOSITAS

TEMPERATIO svo:
AC1: ° F MCDXL (DCCLXXXII ℃)AC3: ° F MCDXL (DCCLXXXII ℃)
AR1: ° F MCDX (DCCLXVI ℃)AR3: ° F MCDX (DCCLXVI ℃)


ebrietas; Pressum gas, oleum calidum, vel sal. Nam gas pressurized, celeritas exstinguiendi rate infra 1000°F (538°C) est criticum ad obtinendas proprietates desideratas. Oleum enim, exstingue usque ad nigrum, circa 900°F (482°C), tunc refrigerabitur in aere adhuc ad 150 -125°F (66-51°C). Sal enim ad 1000-1100°F (538-593°C conservatum), coaequare, in aere adhuc refrigerari ad 150 -125°F (66-51°C).


temperamento: Statim post restinguendam ingenium. Temperatio range est typical 1025-1050 ° C (552-566 ° C). Ad tenere caliditas enim II horas, tunc ambientium, temperatus in frigus aeris. Temperatio duplex requiritur. Magna enim crucis sectiones et codicellos ad hoc praesertim ut interficiam in filum instrumenta unde demittantur, tria Temperatio suadetur valde.


ANNALING

Annealing esse calidum, elapso concessionis working et antequam rursus caecitatem.

Heat at a rate not exceeding 400°F per hour (222°C per hour) to 1525-1550°F (829-843°C), 

and hold at temperature for 1 hour per inch (25.4 mm) of thickness, 2 hours minimum. 

Then cool slowly with the furnace at a rate not exceeding 50°F per hour (28°C per hour) to 1000°F (538°C). 

Continue cooling to ambient temperature in the furnace or in air. The resultant hardness should be 248 HBW or lower.


RES:

1. Maximum celeritatis instrumentum ferramentum tungsten-molybdenum;

2. Maximum gerunt resistentiam;

3. Maximum decarbonizationem.


ItemRatio (mm)processDelivery conditione,
Carmina filumDIA LXX - CDcalidum Rolled& Nigrum superficiem Anneal




Contact Us

Genera calida