EN 
EN
ES
PT
SV
DE
TR
FR
tekniset tiedot
T1 Steel is the most widely used tungsten type of high speed steel according to ASTM/A600 standard.As original HSS,T1 steel has good abrasion resistance, high toughness, high hardness (62~66HRC) ,good red hardness,and easy to grinding. T1 steel can still keep the cutting performance of cutting tools when working temperature is below 600 ℃.The general purpose T1 tool steels and the high-vanadium-cobalt T15 are most commonly used in the T series.
Pikatiedot:
T1 1.3355 sheets, sheet
KOKOONPANO
| C | Si | Mn | P&S | Cr | V | W |
| 0.65-0.80 | 0.20-0.40 | 0.10-0.40 | 0.03max | 3.75-4.5 | 0.90-1.30 | 17.25-18.75 |
Sovellukset:
T1 tool steel is usually used in the manufacture of all kinds of cutting tools,such as turning tool,
milling cutter,reamer,drill bit,saw blade,twist drill, also highly suitable for cold-forming tools such as cold extrusion rams and dies,
as well as plastic moulds with elevated wear resistance and screws.
Tekniset tiedot:
| HSS T-1 -terästen fysikaaliset ominaisuudet | ||
| ominaisuudet | metrinen | keisarillinen |
| Tiheys | 8.67 g / cm3 | 0.313 lb / in3 |
| 1.3355 Teräksen mekaaniset ominaisuudet | ||
| ominaisuudet | metrinen | keisarillinen |
| Kovuus, Rockwell C. | 64.0 - 66.0 | 64.0 - 66.0 |
| poissonin luku | 0.27-0.30 | 0.27-0.30 |
| Joustava moduuli | 190-210 GPa | 27557-30457 ksi |
| T1 Steel Guidelines for Hardening&Tempering | ||
TYÖKALU | T1 | |
| karkaisu | Tempering(twice) | |
| Single-edge cutting tools | 1280 ° C | 550 ° C - 570 ° C |
| Multi-edge cutting tools | 1180 ° C - 1280 ° C | 550 ° C - 570 ° C |
| Cold work tools | 1150 ° C - 1200 ° C | 550 ° C - 570 ° C |
| erä | Mitat (mm) | Käsitellä asiaa | Toimitusehto |
| Sheets | T1.0 - 2.5 | Kylmävalssattu | Musta pinta ja hehkutus |
| T 2.5 - 8.0 | Kuumavalssattu | Musta pinta ja hehkutus |
