2 # rakennus, P5-alue Quan Shui, Ganjingzi District, Dalian, Kiina

kaikki kategoriat
Soita meille

+ 86-411-39641370

Lähetä postia





Ota yhteyttä

tekniset tiedot

A superalloy, or high-performance alloy, is an alloy with the ability to operate at a high fraction of its melting point.[1] Several key characteristics of a superalloy are excellent mechanical strength, resistance to thermal creep deformation, good surface stability, and resistance to corrosion or oxidation.

The crystal structure is typically face-centered cubic (FCC) austenitic. Examples of such alloys are Hastelloy, Inconel, Waspaloy, Rene alloys, Incoloy, MP98T, TMS alloys, and CMSX single crystal alloys.


Nickel-based superalloys are used in load-bearing structures to the highest homologous temperature of any common alloy system (Tm = 0.9, or 90% of their melting point). Among the most demanding applications for a structural material are those in the hot sections of turbine engines. The preeminence of superalloys is reflected in the fact that they currently comprise over 50% of the weight of advanced aircraft engines. The widespread use of superalloys in turbine engines coupled with the fact that the thermodynamic efficiency of turbine engines is increased with increasing turbine inlet temperatures has, in part, provided the motivation for increasing the maximum-use temperature of superalloys. In fact, during the past 30 years turbine airfoil temperature capability has increased on average by about 4 °F (2.2 °C) per year. Two major factors which have made this increase possible are

 Advanced processing techniques, which improved alloy cleanliness (thus improving reliability) and/or enabled the production of tailored microstructures such as directionally solidified or single-crystal material.

 Alloy development resulting in higher-use-temperature materials primarily through the additions of refractory elements such as Re, W, Ta, and Mo.

Tekniset tiedot:

kiinalainen luokkaKansainvälinen luokka
GH2901Alloy 901
GH2907Inconel 907
GH3030Nimonic 75
GH3044        Haynes 230
GH3600        Inconel 600
GH3625        Inconel 625
GH4080A        Nimonic 80A
GH4090Nimonic 90
GH4145Inconel X-750
GH4169Inconel 718

eräMitat (mm)Käsitellä asiaaToimitusehto
Pyöreä palkkiDIA1.0-30Kylmäveto / keskittämätön hiontaKirkas & hehkuttaa
DIA20-80KuorintaKirkas & hehkuttaa
DIA 13-180KuumavalssattuMusta pinta ja hehkutus
DIA 70-400KuumavalssattuMusta pinta ja hehkutus
Litteä baariT 3.0-20 XW 20-100KuumavalssattuMusta pinta ja hehkutus
TukkiaT 20-200 X 300-800Kuumavalssattu ja taottuMusta pinta / Machine & Anneal
VaijerilankaDIA 5.5-13KuumavalssattuMusta pinta ja hehkutus
SheetsT1.0 - 2.5KylmävalssattuMusta pinta ja hehkutus
T 2.5 - 8.0KuumavalssattuMusta pinta ja hehkutus

Ota yhteyttä