2 # hoone, P5 tsoon Quan Shui, Ganjingzi piirkond, Dalian, Hiina

kõik kategooriad
EN
Helista meile

+ 86-411-39641370

Kirja saatma

vicente@konsond.com

O1 1.2510 SKS3

Avaleht>Tooted>Külma töö tööriista teras>O1 1.2510 SKS3

Cold Working Tool Steel O1 1.2510 SKS3 block

Kontakt

tehnilised nõuded

O1 tool steel is an oil hardening, cold work general purpose steel with easy machining properties and low hardening temperatures compared to other grades. O1 provides good wear resistance and toughness sufficient for standard tool and die applications making it a suitable choice for tooling with good tool life and economical production. In situations that require greater size stability during hardening, A2 should be considered. Some common applications include: bending dies, trimmer dies, perforators, broaches, blanking dies, forming dies, cutting dies, bushings, forming rolls, knives, drawing dies, and embossing dies. O1 plates and flats are supplied in a decarb free and annealed condition.


Rakendused:

1.Used for make cold die with small cross section and complicated shape and high precision

2. Used to make sheet stamping touch, jewelry embossing mold

3. Widely used in cutting tools, such as broaches, filament taps, long reamer, special milling cutters

4. For the overall hardened plastic mold

5. For thermosetting plastic forming, it requires high wear resistance and high strength mold


KOOSTIS

CMnSiCrW
0.94
1.200.30
0.500.50


Tehnilised andmed:

Soojuspaisumistegur (63–64 HRC)
Temperatuur︒Fin / in︒F × 10-6Temperatuur︒Cmm / mm︒C × 10–6
100-5005.9638-26010.73
100-8007.1438-42712.85
100-10007.8438-53814.11
100-12008.0238-64914.44


FÜÜSIKALISED OMADUSED

· Tihedus: 0.283 kg / m3 (7833 lb / in3)

· Erikaal: 7.83

· Elastsuse moodul: 31 x 106 psi (214GPa)

· Töötlus: 85-90% 1% süsinikterasest

Surface Finish: Black, Rough Machined,Turned or as per given requirements.

SOOJUSE TÖÖTLEMISJUHISED

KARASTAMINE

KRIITILINE TEMPERATUUR :
Ac1: 1350 ° F (732 ℃)Ac3: 1440 ° F (760 ℃)
AR1: 1295 ° F (703 ℃)AR3: 1240 ° F (671 ℃)


Eelis:

1. Little distortion after heat treatment

2. Hardness up to HRC63  

3. Good toughness, good crack-resistance


KirjeMõõtmed (mm)ProtsessTarnetingimus
BlokeerimaT 20-200 X 300-800        Kuumvaltsitud ja kuum sepistatudMust pind / masin ja anniil


Võtke meiega ühendust

Kuumad kategooriad