2 # Zgrada, P5 zona Quan Shui, okrug Ganjingzi, Dalian, Kina

Sve kategorije
EN
pozovite nas

+ 86-411-39641370

Pošaljite poštu

vicente@konsond.com

H13 1.2344 SKD61

Početna>Proizvodi>Čelici za vruće radne alate>H13 1.2344 SKD61

Čelici za vrući radni alat H13 1.2344 blok

Kontaktiraj nas

Specifikacije

H13 Tool Steel is chromium hot work tool steels which are widely used in hot and cold work tooling applications. H13 tool steel is classified as group H steels by the AISI classification system. This series of steels start from H1 to H19.

In steel H13, the molybdenum and vanadium act as strengthening agents. The chromium content assists die steel H-13 to resist softening when used at high temperatures. H-13 die steels offers an excellent combination of shock and abrasion resistance, and possesses good red hardness. It is capable of withstanding rapid cooling and resists premature heat checking. Tool Steel H13 has good machinability, good weldability, good ductility, and can be formed by conventional means.

Due to H13 tool steel excellent combination of high toughness and fatigue resistance, AISI H13 hot work tool steel is used more than any other tool steel in tooling applications.


SASTAV

CMnSi
CrMo
VC
0.40
0.401.005.25
1.351.00
0.40


Aplikacije:

Umetci, jezgra i šupljine za kalupe za tlačno livenje, čahure za livenje pod pritiskom, kalupe za toplo kovanje, kalupe za ekstruziju i plastične šupljine kalupa i komponente koje zahtevaju visoku žilavost i odličnu mogućnost poliranja.


Specifikacije:

Toplotna provodljivost
Temperatura︒FBtu/hr-ft︒FTemperatura︒CW/m︒C
8010.172717.6
40013.5220423.4
80014.542725.1
120015.4964926.8


Modul elastičnosti
Temp︒FModulus psi×10-6Temp︒CModulus Gpa
7030
21206.8
2002993199.9
40027204186.2
60028.5316196.5
80027.5427189.6
100023538158.6


Koeficijent toplinske ekspanzije (47-48 HRC)
Temperatura︒Fin/in︒F×10-6Temperatura︒Cmm/mm︒C×10-6
80-2005.8
21-9310.4
80-4006.321-20411.3
80-8006.921-31612.4
80-12007.321-42713.1
80-1500
7.521-53813.5

prednost:

Good resistance to abrasion at both low and high temperatures

High level of toughness and ductility

Uniform and high level of machinability and polishability

Good high-temperature strength and resistance to thermal fatigue

Excellent through-hardening properties

Very limited distortion during hardening


stavkaDimenzija (mm)procesUslov isporuke
BlokT 20-200 X 300-800Vruće valjani i vruće kovaniCrna površina / mašina i žarenje


Kontakt

Vruće kategorije