2 # Zgrada, P5 zona Quan Shui, okrug Ganjingzi, Dalian, Kina

Sve kategorije
EN
pozovite nas

+ 86-411-39641370

Pošaljite poštu

vicente@konsond.com

D2 1.2379 SKD11

Početna>Proizvodi>Alat za hladni radni čelik>D2 1.2379 SKD11

Cold Working Tool Steel D2 1.2379 SKD11 round bar

Kontaktiraj nas

Specifikacije

D2 steel round bar can be used to produce cold work mold with a large cross-section, complex shape, high impact force, and high wear resistance. It also is called DIN 1.2379 and JIS SKD11 steel. It is a high-carbon and high-chromium cold work mold steel. It is widely used in the world. It has high hardenability and the high-temperature oxidation resistance is good. The anti-corrosion ability is good after quenching and polishing, and the deformation is small after the steel heat treatment. 


Aplikacije:

1.2379 steel is used for blanking or forming dies, thread rolling dies, shear knives, food-processing knives, gauges, punches and etc.


SASTAV

C
MnSi
Cr
Mo
VC
1.50
0.300.30
12.000.75
0.90
1.50


Specifikacije:

D2 Steel Round Bar Heat Treatment

Termičku obradu

DIN 1.2379 steels alloy should be preheated very slowly to 815℃ (1500°F) and the temperature can be increased to 1010oC (1850°F). Then held at 1010oC (1850°F) for 20 to 45 minutes and air-cooled (air quenched).


prekaljivanje

Annealing of 1.2379 tool steels material should be done at 871 to 898°C (1600 to 1650°F) followed by slow furnace cooling at 4.4°C (40°F) per hour or less, after which cooling rate could be increased. At the same time, must do something to prevent excessive carburization or decarburization.


Smanjenje naprezanja

Heat it slowly to 1050°-1250°F, allow to equalize, and then cool in still air(Strain Relieving)


Preheat Prior To Hardening

Preheat slowly to 1350°-1450°F and hold at this temperature until steel 1.2379 steel material is uniformly heated.


Round Bar

Specification: Dia Max 800mm; Length: Max 6m

Surface: Black, Peeled, Machined(Turned), Polished(Grounded)•


stavkaDimenzija (mm)procesUslov isporuke
Round BarDIA1.0 - 30Hladno crtanje / Brušenje bez centraBright & Anneal
DIA20 - 80PilingBright & Anneal
DIA 13-180Vruće valjanoCrna površina i žarenje
DIA 70 - 400Vruće valjanoCrna površina i žarenje


Kontakt

Vruće kategorije