2 # Zgrada, P5 zona Quan Shui, okrug Ganjingzi, Dalian, Kina

Sve kategorije
EN
pozovite nas

+ 86-411-39641370

Pošaljite poštu

vicente@konsond.com

D2 1.2379 SKD11

Početna>Proizvodi>Alat za hladni radni čelik>D2 1.2379 SKD11

Cold Working Tool Steel D2 1.2379 SKD11 block

Kontaktiraj nas

Specifikacije

D2 Tool Steel is a versatile high-carbon, high-chromium, air-hardening tool steel that is characterized by a relatively high attainable hardness and numerous, large, chromium-rich alloy carbides in the microstructure. These carbides provide good resistance to wear from sliding contact with other metals and abrasive materials. 


Aplikacije:

Rolls, punches, dies for blanking, forming, trimming, and thread rolling, shear knives, food-processing knives, and gauges.        


SASTAV

CMnSi
Cr
Mo
VC
1.50
0.300.30
12.000.750.90
1.50


Specifikacije:

FIZIČKE SVOJINE

· Gustina: 0.278 lb/in3 (7695 kg/m3)

· Specifična težina: 7.70

· Modulus of Elasticity: 30 x 106 psi (207GPa)

· Obradivost: 50-60% 1% ugljeničnog čelika


UPUTSTVO ZA TOPLINSKU OBRADU

KALJIVANJE

KRITIČNA TEMPERATURA:
Ac1: 1449°F (788 ℃)Ac3: 1553°F (845 ℃)
AR1: 1418°F (769 ℃)AR3: 1373°F (744 ℃)


prednost:

Chinese Cr12Mo1V1 steel, American D2 steel, Japanese SKD11 steel, the chemical composition of them is the same, but the performance is very different. After heat treatment, the color of Cr12Mo1V1 is a little orange-red, and the deformation would be large. It is easy to fracture during use. And the hardness of D2 steel is higher than SKD11 steel, but the toughness is not better than SKD11 steel. SKD11 steel is light and smooth, with the best overall performance.


stavkaDimenzija (mm)procesUslov isporuke
BlokT 20-200 X 300-800Hot Rolled &Hot ForgedCrna površina / mašina i žarenje


Kontakt